Transformateur 2000w d'origine WELL SMPS 220v 12v avec UL CE TUV et PFC 5 ans de garantie RSP-2400-12
Description du produit
MODEL | RSP-2400-12 | |
OUTPUT | DC VOLTAGE | 12A |
RATED CURRENT | 166.70A | |
CURRENT RANGE | 0~166.70A | |
RATED POWER | 2000W | |
RIPPLE & NOISE (max.) Note.2 | 150mVP-P | |
VOLTAGEADJ.RANGE | 10.8~13.2V | |
VOLTAGE TOLERANCE Note.3 | ±1.0% | |
LINEREGULATION | ±0.5% | |
LOADREGULATION | ±0.5% | |
SETUP.RISEHOLD.TIME | 1000ms, 80ms at full load | |
HOLD TIME(TYP.) | 10ms at full load | |
INPUT | VOLTAGERANGE | 180~264VAC 254~370VDC |
FREQUENCYRANGE | 47~63HZ | |
POWER FACTOR (Typ.) | 0.95/230VAC at full load | |
EFFICIENCY (Typ.) | 91% | |
AC CURRENT (Typ.) | 15.5A/180VAC 12A/230VAC | |
INRUSH CURRENT (Typ.) | 60A/230VAC | |
LEAKAGECURRENT | <2.0mA/240VAC | |
PROTECTION | OVERLOAD | 100~110%rated output power |
User adjustable continuous constant current limiting or constant current limiting with delay shutdown after 5 seconds, re-power on to recover | ||
OVER VOLTAGE | 13.8~16.8V | |
Protection type : Shut down o/p voltage, re-power on to recover | ||
OVER TEMPERATURE | 95±5(12V), 100±5(24V,48V) (TSW1: detect on heatsink of power transistor) | |
95±5(12V), 85±5(24V), 80±5(48V) (TSW2 : detect on heatsink of o/p diode) | ||
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down | ||
FUNCTION | AUXILIARY POWER(AUX) | 12V @ 0.1A (Ohly for Remote ON/OFF control) |
REMOTE ON/OFF CONTROL | Please refer to function manual | |
ALATPW SIGNAL OUTPOL | Please refer to function manual | |
OUTPUT VOLTAGE TRIM | 9.6 ~ 56V | |
CURRENT SHARING | Please refer to function manual | |
ENVIRONMENT | WORKING TEMP | -20~+70 (refer to output load derating curve) |
WORKINGHUMIDITY | 20~90% RH non-condensing | |
STORAGE TEMP HUMIDITY | -40~+85 10~95%RH | |
TEMPCOEFFICIENT | ±0.05%(0~50) | |
VIBRATION | 10~500HZ,2G10min/1cycle,60 min each alongX,Y,Zaxes | |
SAFETY&EMC | SAFETY STANDARDS | UL60950-1, TUV EN60950-1 approoved |
WITHSTAND VOLTAGE | 1/P-0/P:3KVAC 1/P-FG:1.5KVAC 0/P-FG:0.5KVAC | |
ISOLATIONRESISTANCE | 1/P-0/P,1/P-FG,0/P-FG:100M Ohms/500VDC/25/70%RH | |
EMI CONDUCTICN& | Compliance to EN55022(CISPR22) | |
RADIATION | ||
HARMONICCURRENT | Compliance to EN61000-3-2,-3 | |
EMS IMMUNITY |
Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, , light industry level, criteria A |
|
QTHERS | MTBF | 106.7Khrs min MIL-HDBK-217F(25) |
DIMENSION | 278*177.8*63.5mm(L*W*H) | |
PACKING | 3.3Kg 4pcs / 14.2Kg / 1.89CUFT | |
NOTE |
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. |
|
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. | ||
3. Tolerance : includes set up tolerance, line regulation and load regulation. | ||
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets | ||
EMC directives. |
Groupes de Produits : Mean Well Ac / Dc Alimentation à découpage > MEAN WELL 75--10KW Alimentation à découpage PFC