MEANWELL PPS-200-27 avec technologie PFC ZVS Alimentation Meanwell 200W 27V
Description du produit
MODEL | PPS-200-27(power supply unit) | |
OUTPUT | DC VOLTAGE | 27V |
RATED CURRENT | 7.4A | |
CURRENT RANGE (convection) | 0 ~ 5.56A | |
CURRENT RANGE (20.5CFM FAN) | 0 ~ 7.4A | |
RATED POWER (convection) | 150W | |
RATED POWER (20.5CFM FAN) | 199.8W | |
RIPPLE & NOISE (max.) Note.2 | 150mVp-p | |
VOLTAGE ADJ. RANGE | 24.3 ~ 30V | |
VOLTAGE TOLERANCE Note.3 | ±2.0% | |
LINE REGULATION | ±0.5% | |
LOAD REGULATION | ±1.0% | |
SETUP, RISE TIME | 1200ms, 60ms/230VAC 2500ms, 60ms/115VAC at full load | |
HOLD UP TIME (Typ.) | 11ms/230VAC/115VAC at full load | |
INPUT | VOLTAGE RANGE | 90 ~ 264VAC 127 ~370VDC |
FREQUENCY RANGE | 47 ~ 63Hz | |
POWER FACTOR (Typ.) | PF>0.93/230VAC PF>0.98/115VAC at full load | |
EFFICIENCY (Typ.) | 89% | |
AC CURRENT (Typ.) | 2.2A/115VAC 1.2A/230VAC | |
INRUSH CURRENT (Typ.) | COLD START 70A/230VAC | |
LEAKAGE CURRENT | <2mA / 240VAC | |
PROTECTION | OVER LOAD | 105 ~ 135% rated output power |
Protection type : Hiccup mode, recovers automatically after fault condition is removed | ||
OVER VOLTAGE | 31.05 ~ 36.45V | |
Protection type : Hiccup mode, recovers automatically after fault condition is removed | ||
OVER TEMPERATURE | 110°C±5°C(TSW1) detect on heatsink of power transistor | |
Protection type : Shut down o/p voltage, recovers automatically after temperature goes down | ||
ENVIRONMENT | WORKING TEMP. | -20~+70°C (Refer to derating curve) |
WORKING HUMIDITY | 20~90% RH non-condensing | |
STORAGE TEMP., HUMIDITY | -40~+85°C, 10~95%RH | |
TEMP. COEFFICIENT | ±0.05%/°C (0~50°C) | |
VIBRATION | 10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes | |
SAFETY&EMC | SAFETY STANDARDS | UL60950-1, TUV EN60950-1 approved |
WITHSTAND VOLTAGE | I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC | |
ISOLATION RESISTANCE | I/P-O/P, I/P-FG, O/P-FG:100MOhms/500VDC/25°C/70%RH | |
EMC EMISSION | Compliance to EN55022 (CISPR22) Class B, EN61000-3-2,-3 | |
EMC IMMUNITY |
Compliance to EN61000-4-2,3,4,5,6,8,11, EN55024, light industry level, criteria A |
|
OTHERS | MTBF | 108.4Khrs min. MIL-HDBK-217F (25°C) |
DIMENSION | 127*76.2*34.6mm (L*W*H) | |
PACKING | 0.37Kg; 36pcs/14.3Kg/0.79CUFT | |
NOTE |
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25°C of ambient temperature. |
|
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. | ||
3. Tolerance: includes set up tolerance, line regulation and load regulation. | ||
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets EMC directives. | ||
5. Heat Sink HS1,HS2 can not be shorted. | ||
6. Length of set up time is measured at cold first start. Turning ON/OFF the power supply very quickly may lead to increase of the set up time. |
Groupes de Produits : Puissance moyenne d'alimentation de cadre ouvert bien 5W ~ 400W > Série PS / LPP 5W ~ 250W